Knowledge base \ Direct Connect

Direct Connect Article

Knowledge base \ Direct Connect \ Configure New API Connection

Configure New API Connection

Setting up a new API connection in the Direct Connect module is straight forward and only takes a few minutes, using our one-click setup.

Path: System Administration à Setup à Direct Connect à API Connections

Create new record

  • 1
    Press the “New” button
  • 2
    Enter a unique ID for the connection;
  • 3
    Select the connect product you are using for the connection.
  • 4
    Select the platform you want to connect to.
  • 5
    Enter the URL endpoint for the platform you are connecting to.
  • 6
    Enter the URL endpoint for Enter your unique access key provided to you by the external platformthe platform you are connecting to.
  • 7
    Enter the secret key provided to you by the external platform

Define data to transfer to external platform

In addition to receiving data from the external platform, you can also define which data to send to the external platforms. This is done in the data transfer area which is accessed in the ribbon.
In here you select the data type you want to transfer to the external platform, the options available are specific for the type of connector used.
Note: Not all data transfer types are activated, these can however be activated on request and are subject to the external platforms API supporting it.

Define field mapping for the API

For each connection the data that’s retrieved via the API has to mapped to fields in the connectors staging table. This is fully configurable, but all connections comes with a default one-click setup to get you started.

In this article